An advantage of the shark vacuum over its bagged counterparts is that it does not require those replacement bags.
The only disadvantage to the Shark is that the user will have to empty the dust bin after each use regardless of the size of the mess or how clean you keep your home, ultimately meaning more time spent cleaning. Always make sure and check before emptying that bin.
The company recommends doing so every time as well but having an actual mechanism in place rather than just an “ideal” can also help prevent clogs in case some debris manages to lodge in there without you knowing it and thus ensuring a less frustrating experience when using your device.
How to empty a shark vacuum
How to empty out a shark vacuum can be tricky, especially for new owners. It’s especially important to check the suction power and rotate the shark brush alongside the vacuum hose when cleaning the filter cup of all sorts of debris.
Another sign that your filter needs a good rinse is if you notice a bad odor coming from the device. Also, if you hear air screeching to get through while vacuuming then try cleaning it immediately.
Disconnect the AC power source
When cleaning your vacuum, one step is to make sure the device is unplugged from the power outlet. Also, remove the plug and place the device in an open space like your garage or a patio so you can clean up easily.
If you have a cordless Shark Duo Clean vacuum, you will need to remove its battery first. Here is guide dyson vacuum not sucking
Opening the Shark Vacuum
One of the main features that make a shark duo hard floor vacuum better than many others on the market is the way it opens and closes.
The system used by most other models involves bending over and manually folding down the handle and tapping down the pedal to open or shut depending on your desired cleaning mode.
Keep dust containers separate
When the debris from cleaning begins to get too much, you may need to remove the dust cup or empty the collection unit so that you can get rid of any extra dirt before it builds up too badly.
Kärcher vacuums have a handy dirt cup system that allows for collected material to either be dumped straight into an appropriate trash receptacle or just removed and emptied directly into the bin or trash once you are ready to begin cleaning again.
Dispose of the pre-motor filter
In the instance that your shark duo clean vacuum cleaner comes with a pre-motor filter, you may experience a build-up of dust and particles on the filter which can stop it from properly functioning.
This can be remedied by looking for instructions for how to remove the pre-motor filter, as well as any necessary cleaning procedures.
Clean the canister
You should put the bin back into the device, then push the button on the side of it to make it slide in.
Clean off as much dust and contaminants as possible with a damp cloth, then spray water inside of the canister and filtration system to remove what has clung on or anything that might have been caught in between.
Be sure to wipe this down afterward with a dry towel and make sure all of your components are thoroughly dried so no parts start rusting in combination with moisture. Here you find best vacuum sealer consumer reports
Reposition and dry out the dust container
After cleaning the device, make sure there is not any moisture left in your cleaning materials. The device must be completely dry before you attempt to reassemble it.
Next, you will need to lightly tap the part so that it fits back into the device’s frame. Then check to see if the device is functioning properly or not before you start working with other parts as well.